Back to Solid/Liquid Extraction

8l Jacketed Solid/Liquid-Extractor

• Exact control of the extraction temperature
• Gentle motion/smoothening of the solids by a manual stirrer
• Lowering device for easy removal of the extraction basket
• Automated solvent flow through the extractor
• Solvent preparation
• Cycling the solvent
• Ex-protected version
• Pilot Plant Solution
• Fully corrosion resistant
Contact us

Concept

  • Manual extraction system for kg-quantities of solids.
  • Extraction modes:
    • Trickle bed extraction
    • Underflow extraction
  • Solvent preparation with a 25l stirred evaporator with a jacket for heat transfer fluid.
  • The temperature of solvent for the extraction is close to its boiling point and can be regulated by the applied vacuum.
  • The temperature of the extraction receiver can be adjusted.
  • The flow rate of the solvent is automatically controlled.
Flow Chart of 8l Extraction System

Function

A basket which can be filled with solids outside the system is accommodated in the extraction receiver. The hot solvent is fed into the upper part of the extraction receiver dripping on top of the solids in the basket and trickling though the solid material. A bottom outlet valve of the extraction receiver permits manual control of the extraction mode – trickling, flooding and draining. The solvent containing the extract is then guided back to the jacketed stirred evaporator. The solvent vapors from the evaporator are condensed in an uprising condenser and withdrawn by an automated reflux divider. The set points of the evaporation rate and reflux ratio control the flow rate of the solvent. The distillate take-off at boiling temperature is then guided directly to the extraction vessel. The extraction vessel is equipped with a level switch to detect eventual overflow. After the extraction process the extraction vessel can be lowered to easily take out the extraction basket for discharging, cleaning and reloading with fresh solids outside of the system.

Technical description

The 8l basket containing the solids is a cylindrical receiver with a porous sintered glass plate at the bottom. The basket can be placed easily into the 10l extraction receiver (B2) due to a lowering device for the lower part of the jacketed extraction receiver.  A manual stirrer in the basket which can be moved up- and downwards permits to gently move the solids in the extraction basket during the extraction process. Compact bellow valves control ventilation and product flows. The 25l stirred evaporator (B1) is jacketed to be heated with a heat transfer fluid. The vapor pipe DN50 connects the evaporator to the inclined coil type condenser (W1). The distillate take-off is adjusted by a magnetically actuated funnel.  

System with a stirred jacketed evaporator and jacketed extraction vessel
8l Jacketed extraction vessel with manual stirrer

Technical Data

  • Basket for solids (in B2):                     8l
  • Extraction receiver (B2):                    10l
  • Evaporator (B1):                               25l
  • Vapor pipe (K1):                               DN50
  • Condenser (W1):                               0,7m2   
  • Vent condenser (W2):                        0,6m²
  • Dimensions:                                     2600 x 900 x 1800mm
  • Ex-Zone in-/outside:                          1/1 II B
  • Extraction Temperature:                    -20 up to 150°C
  • Extraction pressure:                          -1 up to atmospheric pressure
  • Material in contact with product:        Borosilicate glass 3.3, PTFE, PFA
Questions? We are here to help.
If you'd like to talk with a sales representative about purchasing De Dietrich Process Systems's products and services, you can reach us here.
Contact us
Documents 
Contact us
Close
Document download
Thank you to provide us some information before starting the download.
* Required fields

Les informations recueillies sur ce formulaire sont enregistrées dans un fichier informatisé par De Dietrich pour entrer en contact avec vous suite à votre candidature. La base légale du traitement est l’exécution de mesures précontractuelles.
Les données collectées seront communiquées aux seuls services compétents au traitement de votre demande chez De Dietrich.
Les données sont conservées la durée nécessaire à la réalisation des finalités pour lesquelles elles ont été collectées.
Vous pouvez accéder aux données vous concernant, les rectifier, demander leur effacement ou exercer votre droit à la limitation du traitement de vos données. Vous pouvez retirer à tout moment votre consentement au traitement de vos données.
Pour exercer ces droits ou pour toute question sur le traitement de vos données dans ce dispositif, vous pouvez vous adresser par courrier électronique à dpo@dedietrich.com
Si vous estimez, après nous avoir contactés, que vos droits « RGPD » ne sont pas respectés, vous pouvez adresser une réclamation à la CNIL.